!Spook!

Thanks for feedback, All componants are new!!! I was pretty impressed with the Flash Tuner price as CAPA RRP is $995, with this kit it works out $40 cheaper!! My only concern was the IC price & whether I was gettin a good quality IC....Obviously it will be much better than stock....but has anyone installed a Monza MSPEC IC [WogCooler] into their T & can give me the thumbs up?? Cheers Spook

Hey Guys & Gals, I can get my hands on what I think is a cheap kit for my T.... The kit includes 1.Intercooler upgrade [450mm x 300mm x 75mm] Monza MSPEC 2. CAPA Flash tuner with 3 programed tunes 3. Blow off valve adapter kit 4. Blow off valve [twin trumpet] The price I've been quoted is $1550 Are these good mods as well as a good price??? I'm going to go with the custom tune once all is installed [installation being done by myself] Is this a good deal or are there better kits out there available for around the same price?? Any feedback would be greatly appreciated!!! Spook

Thanks for the feedback fella's!!! I'm not super clue'y when it comes to mods on turbo's is there anything in particular that I should ask or look for??? [Looking for best bang for buck with CAPA] Cheers

Hey guys & gals So....I've finally got enough green to get my first mod!!! I want to go with the CAPA Ford Flash tuner to start off with...then look ahead later!! [I want to appreciate the power of these mods] I'm in WA Metro area & I've found the following dealers who stock the tuner. Do any of you guys/gals know these places & which would you recommend?? Perhaps there are some that do deals as well I don't know!! Xtreme Ford Tuning 13 Betula Crt Helena Valley PSI Performance 5/47 Paramount Drive Wangara Marks Workshop 20 Maxwell Street York Ford Performance Tuning WA 45 Berrimon Drv Wangara Chip Master Unit 2/29 Emerald Rd Maddington Thanks in advance !Spook!

Well I'm finally able to log on to this site!!! Had a bit of trouble & have been out of action for quite sometime now!! Anyway I have a question for all WA T owners [or anyone who may know]..... After looking at the APS site I found a Performance shop close [or there abouts] enough to me so I can mod my T......My question is has anyone heard of Formaz Performance Centre in Attadale?? And are they worthy enough to touch my T?? I'm after getting my hands on the APS Stage 1 kit along with the upgraded valve springs!! If anyone has any other suggestions for best bang for buck than APS & in WA, im open to all comments!!! Cheers Spook

Dirty Little Matt is sitting in the back of math class, obviously not paying any attention, when the teacher calls his name. "Yeah teach?" he replies. "If there are three ducks on a fence and you shoot one of them with a shotgun, how many are left?" asks the teacher. Matt answers "Well, teach, if I shoot one of them with a shotgun, the loud noise is gonna make them all fly off." "No, Matt, there will be two left if you shoot one with a shotgun, but I like the way you're thinking." the teacher responds. "Well, teach, I've got a question for you... There are 3 women that come out of an ice-cream parlor, one is biting her ice-cream cone, one is licking it, and one is sucking on it. Which one is married?" The teacher, a little taken back by the question answers, "Well, uh, gee Matt, I guess the one that's sucking on the ice cream." Matt replies "No teach, the one that has the wedding ring on her finger, but I like the way you're thinking!"

Wasn't sure where to put my Topic Trumpy???

Yep you're right TurboDewd!!! I hit the 2 instead of the 1 the exact figure is actually 217.6698rwhp... I've got a conversion program on my computer its great. Sorry Falchoon if I've brought up old subjects of disscussion, I just thought I'd ask cause I was actually expecting a figure less than what I got & no where near what my car actually pulled.

Hello People's This is my first post in quite some time & I thought I'd give my results from our Workplace dyno day. Ive read in a couple of other posts that the stock T puts out from 170 to 210rwkw. I happened to pull 227rwkw (if you convert the total of 291.9rwbhp to kw) Does this seem ok or should I get it tested on another dyno, in case this dyno was out quite a few horsepower??? Cheers

Dr Nick Operating on Homer The red veins connected to the blue vein, the blue veins connected to my wrist watch.....

Hello everyone I was just wondering has anyone swapped their 17inch wheels for the 18inch wheels? And also how much would this set one back? Can you trade in/swap the 17's and pay the difference for the 18's? Can anybody help with this?

No worries muzzzza Thanks for all your help. Your setup looks unreal mate!

Im in Perth, I'll ask around a few places see if I can find some who'll do it. Does that guy work for a big company that maybe over here in Perth? Just not quite sure where to start. That would be great if ya could get some pics. Cheers Mate...

Hello Redhawk Thanks for the welcome. No beating around the bush here mate. Its for those so called romatic cruises with the misses. I'll leave the rest up to you mate as you seem to have a very imaginative mind.

Thanks muzzzza So im looking@half of that price4da screen and install in da front. Where abouts can I get all of this done? Is there any places you recommend? Im still not quite sure about this handbrake thingy I"ll just have to ask the guy's there when I get it done. Cheers dudes