j.d
-
Posts
1,222 -
Joined
-
Last visited
-
Days Won
1
Everything posted by j.d
-
ute? 35mm spacers
-
Spotted xrt270 in doncaster last night silver fg, any1 from here ??
-
Edit: oops
-
Guards rolled?? Shortened axles?
-
Need spacers to make it work !
-
whats my ute doing? Keeping your nature strip company?
-
mine is lower then "recommend" at the front and its sweet, I was using 19x8.5+0 with a 245/35/19 scrubes over everything but looked so good I didn't care haha, depends what your willing to put up with form>function haha
-
Should be sweet with a 15mm spacer still.
-
I wouldnt use a 10mm slip on. I am using 20x8.5+7 scrubs a little over big bumps I did 20x8.5+17 and no scrubbing whatsoever.... Both with 225/35/20 tyre !! And by that I mean 20x8.5+42 with a 35 and 25 mm spacer !! If I were you I would go 15mm bolt on spacer if you don't want to go as far as a 25mm, you need to remember tyre plays a big part also !! You said u had a 225 tyre? 15mm spacer will be fine
-
I have the same, 5mm spacer will work, or you can be like me and use a 35mm spacer but will need to roll, or just use a 25mm spacer, and no need to roll.
-
our centre bore is 70.5 I would be getting 72mm not 76
-
Will poke, u will need to run stretched Tyres
-
. I would be going +20 fronts and the rears should fit ! But I don't have a sedan will they hit on the inside (rears) anybody with a sedan?
-
either.
-
Maybe not in pictures, but the tyre is practically touching the guard. Edit: in reply to irmcdowell
-
What car u got? Fg or b series
-
Yes, just needa run an appropriate tyre !!
-
+25 up front for sure, Will look nice, it can definitely be done, Im running 19x8.5+0 ATM
-
Calder !
-
c4c entry 1st meet !
-
19x8.5+0 with a 245/34/19 tyre
-
haha I got it at 760 buddy, I dont do that much driving lol, few laps Friday night helped!
-
I bought the purple from a joint called "carx" in Clayton (Melbourne) I think they have a shop on eBay
-
Is that due to leafs?? Yea my left is probably 5mm further out towards guard
-
Factory leafs are alright! Mine are compressed 4.5" lower, had this setup for ages and no troubles at all.
