nxr06

8.48 man that is fast....... How do u fit a turbo that big under a standard bonnet???

yeah im using the factory solenoid to control boost with a 17psi spring in the pro-gate, I guess only 1 way to find out what a duty cycle of 1 will produce....

Yeah better to get home in one piece than roasting a box.. So the 14 psi spring in the pro-gate will hold 30psi?

hey just curious to what wastegate spring you run when going for 31psi??? Did it survive powercruise ok......

great result there..... is there much difference to the gtx45s & 42s......?

yep.. I just tried replacement t-body & still having same issues.... must be software related....

im thinking you might be right.... it's now flapping open & closed on boost & when cruise control is active it goes to 40 percent throttle on its own

see pic attached, you will notice a cap missing of blade shaft, wondering if plays any part holding the throttle body shaft with spring or anyting etc.......

Not sure If same as BA/BF but they are 4 bar or 58psi.

I am from NQ and even I have heard about the infamous dynowog..... Hope he gets his sct tuning license cancelled.....

What info is stored in the ecu logs?

Not quiet the budget I had in mind for some sh*tters... Some 17" ford alloys may have to do...

How can they prove this? Obviously u wouldn't have the guards full of rubber!

ok thanks for the feedback... Are TE37s cheap ? and where did u get them from?

Don't want to sound immature or unconstructive, but if I was in this position where there is no clear fault and getting the run around. I would be considering giving the car the flogging of its life to find the problem.

Ok want to run some rear sh*tters for powercruise, I have the brembos and not that keen to hit them with a grinder. Will 17" fit? Have others fitted smaller brakes to solve this problem? Cheers

HI, just wondering from peoples experience, when have they had to change the standard wastage actuator? What boost does the stock one hold from peoples experiences?

just read this post, updated my dongle & there it was, new ZF software tables

matt do a facebook search for auspeed tuning, have some pics there of the fitment... let me know if you need to see more it might link from here : http://www.facebook.com/pages/Auspeed-Tuning/189909911021986?sk=photos

roughly $4300-4500 which includes tuning... but that's if you fit the gear... otherwise it would be more.

I have tuned my own family turbo territory & fitted front mount intercooler, 42lb injectors, & high flow cat... Have spent a bit of time getting the cruise tuning right & has resulted in excellent fuel economy... pic shows avg fuel for 400km trip from mackay to townsville....... Best "family" car I have ever owner, heaps of room, very fast, and great economy.... shame they dont make them like this anymore.... http://http://i676.photobucket.com/albums/vv130/ixr08/2011-05-12_20-25-12.jpg

As the description says, I have changed & put atomic valve springs into the F6 and have double checked the timing was correct and have run the car for 3 hours plus to bleed the lifters and cannot get it to idle properly. Removing spark coils 1 & 2 seem to make no difference to idle & they are sparking. As the revs build it sounds like loose tappet noise till around 3000rpm then it appears to smooth out. I have given it a quick WOT run and it pulls hard from 3000 rpm onwards..... Haven't tested compression yet but given its power not likely to be down on compression.... Has anyone else had similar problems???

good luck for a 9.... gee you will have earnt it with the trouble you have had....

Where there any issues with high engine oil temps at all, or is it more just pre-caution to install the cooler? I also have virtually identical gear list as you for my BF F6, just got to get the atomic bottom end so I can crank it..... Im please to hear spool up time is good......

HI Just wondering if there is an option that I havent come accross for a 60mm dual guage pod that fits on a dash mounted pod?? I have an SS inductions one which fitted on my BF ute, but it does not fit on the dual zone BF F6 ICC console properly.