Jump to content

dexter morgan

Member
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. louiseanddanny

    wow im a BIG fan, I have a coffee cup saying on the side (How does a serial killer mask the taste of cyanide?)by the end of the drink at the bottom of the cup that you already have drank it says COFFEE!!!

  2. dexter morgan
    Does anybody know which plugs are better for my BA 04 XR6T? the Bosch F1-6 platinum iridium or the NGK iridium BKR6EIX? Should I just get the stock factory Ford plugs (AGSP22Z11)? Does anybody know which plugs will work the best in my BA XR6T 04??The bosch F1-6 platinum plugs have 4 prongs around the electrode so they do look different.I can also use the cheaper NGK plugs FR6EI-11 if there are better but I dont think so as the are very cheap.
  3. dexter morgan
    what plugs are you using at the moment? What would be better the Bosch F1-6 platinum iridium or the NGK BKR6EIX? I have a 04 BA xr6t mark 1. the bosch plugs have 4 prongs on the electrode?
  4. dexter morgan
    its a calibre 52mm boost pressure gauge, got it from Supercheap. m thinking about getting the ford boost gauge that fits ontop of the dash with the clock, I think its a twin pod mount to hold 2 gauges. I have the single clock gauge to install there but want a boost gauge also. I thought the power wire was for the boost gauge to work? The Calibre boost gauge I got has a white wire for 12v,black wire ground and orange wire dash lighting, the instructions say white wire 12v ignition switch,black wire vehicle ground and orange wire 12v dash lighting.
  5. dexter morgan
    I live in Sale Vic, Where does the power wire go? thanks heaps so far looking good
  6. dexter morgan
    Can someone please xplain how to fully install a boost gauge in my XR6T? thankyou
  7. dexter morgan
    how did you go? Im wanting to install a boost guage I the same place.
  8. dexter morgan
    How is the boost gauge installed? Does it have wires behind it? The clock has a power wire, ground wire, dimmer wireand power for the lights wire should be in this order from top to bottom. The yellow/black wire is 12v power etc.
  9. dexter morgan
  10. dexter morgan
    Body Electrics Module BEM.
  11. dexter morgan
    I have 04 XR6T BA ute with no climate control but 6 stacker does anybody know what BEM is in it? Does it have the grey premium BEM? Can I plug the clock into it?Or is it the standard blue BEM I have?
  12. dexter morgan
    hi haveI hae a 6 stacker but no climate control does anybody know if I need to change the BEM to install the dash clock,which needs the premium BEM?or does my ICC already have the premium BEM
×
  • Create New...
'