Bo0st3D XR6

Kris, IH8TOADS was the member who helped me diagnose my tune before and found it to be very poor. Same symptoms rough idle, rpm dips, stalling etc. Definately worth logging your car and let him have a look for ya! IH8TOADS gets my thumbs up for helpfulness!

happened to me twice had the tps replaced seems to do the trick

Any updates? Pics of the new wheels?

Hey guys im just after some suggestions in sydney on a panel shop that can respray the front bumper on my FG. Got scrapes on the side and bottom no major damage but I just want it resprayed. Obviously not after the best of the best shop as its just a respray job without needing to fix anything major. Also dont want some dodgy shops so somewhere decent and wont cost the earth. Is $500 a reasonable price for this type of job? Thanks Ps eastern suburbs or Illawarra suburb locations are preferred but not neccesary

Dunno anywhere in melb but I got the tripods fitted in sydney with a tuner and costed $400

Hey guys ive finally got my FG retuned since been poorly tuned by another workshop. It is tuned at crescent motorsport recommended by Chris (Rapid) so a big thanks to him for helping out as usual! I decided not to go to a "big" name shop anymore as I just want honest work and dedication to the tune and Joe at CMS has done that. Fixed all the stalling and idle issues which was present from previous tune and scaled the injectors correctly. Mods: Rapid V2 kit with battery relocation Bosch Ev14 60lb injectors xforce 4"dump + 5"cat Special thanks to Chris, IH8TOADS, Rhino1980, riki83 and everyone that gave good advice. Overall safe tune 317rwkw with 1100nm+ of torque. Dyno graph will follow soon

You guys might not understand but I think riki will agree with me, both of us dealt with the "bigger" workshops but ended up been dicked around. That's not the point of this thread to put other workshops down but we are just looking for some honest workshop who actually cares about their customers.

Bit the bullet decided not to wait for tunehouse for another 6 weeks and try get it fixed now. Chris kindly booked me in with CMS for tomorrow. Talk about quick service! Fingers crossed good luck comes my way

By the way my xcal3 came with the printer cable otherwise just unplug your printer lol.

Thanks IH8TOAD for helping me out. My car doesnt sound healthy at all =(

I think member here Slymeat had his g6et tuned there and was quite happy. Riki let us know how you go as im waiting for jim to come back but it wont be for another 6 weeks