fluke

Hi, just wanted to know if there is a difference between the rear ABS sensors on a BA/BF Falcon Sedan to a ute/wagon and if so what the difference is Ie: angle, position or shape, if anyone had a pic of a ute/wagon one that would be great.

Just a quick question, I am looking at a service and touch up on my trans and was thinking of putting a higher stall in 2500rpm to 3000rpm. Will I need to get the car tuned or adapted to suit or will it run ok Its a BA 6 N/A with the 4 speed auto and 3.23 diff gears. Thanks

Hi, just noticed tonight that the Airbag /safety belt pretensioner light is coming on while driving. It doesnt seem to be on constant, more when hit the bumps and stuff but even just little bumps make it illuminate. Any help on information is appreciated, and I cant quite remember but is the control module behind the ICC for the Airbag/Safety belt pretensioners.

With these mods makes it quite good to take off compared to standard and very driveable normally. yeah its a N/A. Cheers

Hi just after advice, Got a Falcon sedan BA and gunna be selling soon but gotta decide whether to take out or leave a couple mods on the car. I can A: Sell the car with the 4:11's(4:10's actually but we all say 4:11's) , high stall and Flash tuner or B: Take these bits out which will cost some $$$ to reinstall the standard stall and replace the original diff and then sell the car. Whats peoples thoughts, with these mods the car is still very drivable at a normal pace but also gives a nice pick up over standard when needed though. Cheers

Always like to get a second opinion on things looking at 16 x 6.5 , +40 Offset These figures should fit ok on the falcon yes, as it means they are only sitting in an extra 5mm each side.

So, 16x8 +22 front and 16x9 +22 rear on BA Sedan wouldnt work. Tried talking to a wheel shop but they just confused me, more sensible responses on here

Havent seen anything on change over, it may be cheaper and quiker just to replace the driveshaft. Hope you can get it sorted quickly though

That would be nice, definatley improve the power figures, but atmo minister of finance has higher power figures that prevent any upgrades, ha ha

Would love to go shopping and come home with one of those, nice

Nice, love that colour

I need a service on my BA N/A 6 auto, what is reccommended and is there anything they can do while servicing, filter fluid change, mods that will tighten up and give a bit more life to the auto. Doesnt require rebuild just yet. Thanks

Nice write up,

Hi, what is the offset range we can work with for wheels on a BA/BF Falcon, between +35 and +40 or what is best recommended. I have +35 on now which I think is also the the standard offset.

approx 160-175 depending on tune