ENVYOSXR

Mine rattles on idle as well, its either heat shielding or clutch rattle on mine. Getting a new clutch in a few weeks see if it goes away. Maybe check the heat shielding around the exhaust they are prone to rattle

Ok I purchased a licence and have DashCommand integrated into centrafuse now. Looks really good have been modifying the GTR style skin to suit the guages I want to see and that are available on our cars. There are three PID's that I would love to have but don't think is possible on these cars well from the ODB connector anyway. I would like to be able to get Fuel Pressure, Oil Pressure, and Oil Temp there are PID's for these but I don't think they are supported by our cars. I did read on fordmods forum that you can get fuel pressure so I need to have a poke around an see what I can find. Anyone here have any idea about these PID's I am after? Will keep posted what I discover!

I have just received my ODBPro ScanTool and I have installed it all and have installed a Trial of DashCommand 2 all the readings I am getting is engine RPM. Do I need to buy a full licence to see the rest? I am willing to purchase a licence just didn't want to if it wasn't going to work properly. Thanks mate

hey mate there where a few topics flying around a while ago about this but I don't think there was a solution found for it. I had a google for a answer but nothing to be found really.

I know guys running stock cars with these plugs, but they arn't cheap mine cost about $125.00 for the 6 of them.

I use NGK BKR6EIX pre gapped to 0.8mm. Check out this post for info on replacing the spark plugs. Spark Plug Post

Its a load of crap all these speed camera's. I use my satnav with speed camera updates and it as not missed one to date.

Thanks guys issue is fixed now.

Hey guys, Some how I have seemed to have lost the sites theme. The forum looks normal before I have logged in but once I log in I get the IP Board theme. It looks like a stock IP Board forum, any ideas? I have looked in the drop down at the bottom and there is only IP Boad, and IP Board Lo Fi to choose from, neither bring back the theme. Thanks

Looks good mate, ive got mine in the boot(not a permanent location) at the moment as I couldn't find a good spot in the cabin. That looks like a decent enough spot, don't like the idea of drilling wholes in my car though.

Great story mate, will sure get ETM some more customers I would think. I have been meaning to get one for a few months now, and this just helped me along. Appreciate the info mate. And

I just ordered one of ODB Proes ones with a 90 degree cable, should be good. Does anyone know if you can pick up oil presure though one of these?

I got mine from autobarn, you should be able to pick one up from there.

some one will correct me if I am wrong, but I wouldn't be running much more than 340 on standard BA rods. I know there are alot of guys on here that are running there cars with some big power on stock rods but I would have some cash banked up if it goes bang.

Came across this one ebay the other day, wondering if anyone has used it and if it is any good? I am was about to order a ETM one but then saw this on ebay. He has seemed to have sold a few of them. Ford BA Turbo Oil Line/Filter

Thanks mate, I did have a look at these once before just wasn't too sure if they were compatible. Will order one in the new year!

Yea I use a microfibre mit, I had a memory blank before of what they were called haha. The 2 bucket idea is good.

Love it exactly what I do at the car wash, I never use their brushes or soaps. I take a bucket and clean sponge and my own car washing liquid. Great infomation mate, sometimes simple is better just like you said.

Looks like that's well and truly stuffed, are they a hard thing to replace yourself or best to get it done when I am getting my clutch put in?

fair enough, thanks for the advice guys

Hey guys, I am after a OBD scanner that works with Centrafuse 3.0. I have had a look around and seen a few but not sure if they work with our cars. What are people using on here? Thanks

any chance of posting a image for people to look at, sounds interesting.

haha how did I know I was going to get a response like that. its hard to explain, basically its sounds like diff clunk one after another but only happens when the car is rolling not under acceleration or brake. if I hit the gas it stops and if I push in the clutch. when I take the foot off the gas and go down a slight incline it will be fine some of the time, but other times it wont. I have a feeling it is the centre diff bush also, if I replace this what else should I be replacing while I am at it in that ares? I am also due for a new clutch could that be part of the problem? Thanks guys

Hi guys, I have this wierd shudder/jerking happening when coasting at low speeds. Only noticed it at anything below 60kmh when just rolling, it sometimes starts to jerk like something gets out of rythm. If I push the clutch in and release it, it comes good again. Same deal if I put the foot on the gas it comes good. Some info on the car: - 310rwkw - 6sp Manual (Transmax Z Fluid) - 05 BA MkII It used to only do it rarely in third, but now it happens more fequently. I am think diff bushes maybe? Any ideas would be great!

Well ended up getting it all done, got a seperate pump for my gearbox oil now. Transmax Z is so much better than what ford use.