fpr000
-
Posts
107 -
Joined
-
Last visited
Everything posted by fpr000
-
Yep both work on brake and tail light
-
Have a little problem that sh*ts me....cruise control wont turn on....? Yes ive checked clutch and brake pedal switches they seem fine....anything else?? Bem?
-
Trans max
-
yas reckon thicker oil?
-
yeah no milkshake...thankgod
-
howd ya go?
-
Looking At Buying A Fg F6 But Has High Kms
fpr000 replied to Blynch55's topic in FPV PERFORMANCE INC.
http://www.carsales.com.au/private/details/fpv-f6-2009-14356899?base=1216&vertical=Car&cr=1&eapi=2&__N=1246%201252%201247%201282%204294965879%204294954501%201216%204294680278&num=15&silo=Stock&sort=~Price I work for Ford at Singleton....tellin ya's this is not a bad buy.... -
I wasnt sure if the shudder was a box tune issue or if its a slippage....best way to describe it is its like youer goin over a cattle grid whist in 2nd gear under load
-
nah was doin it before service, that's why I did the service..shes holding 430hp at wheels atm and no zf tune yet
-
hi guys was wondering if anyone has ever had this? in 2nd gear my ZF seems to shudder under load?? help it sh*ts me lol. its had a service 2000kms ago
-
What usually happens when the bolts come loose?? does it cause slippage etc?
-
Huh? I sell em at Sutton Ford in Singleton, and as far as im aware theres no employee discount??
-
however the F6 has stronger internals over the G6ET.....easier to mod with having to spend up too much
-
True as, my F6 is an ex-chaser and the only way I could find that was pulling passenger seat back and looking in the back of the books. However was very well looked after....no marks on dash etc
-
Currently the car is sitting at 450hp at treads
-
No lights, just when you boot it above 2000rpm in second its axle tramps for a bit and revs go right up near redline and loose torgue......
-
yeah mines a 6 speed, starting to really sh*t me atm, only does it intermittaley
-
HI guys My ZF seems to slip in 2nd gear???icould this be caused by low fluid or service?? I work for a ford dealer and my workshop tell me that these ZF's dont get service...is this bull or what??? My F6 currently makes 400hp at wheels but it sux when I go to get uo her she seems to slip.
-
Hey peps, Can anyone tell me how much fuel I should have in the tank before it goes on the dyno? I know its a silly question but thought id ask.
-
What's everyone's opinion on the 100 octane at the United??
-
Etc Light Comes On And Car Dies!
fpr000 replied to fpr000's topic in Fuel System & Induction Workshop
ok will do thanx for that mate. -
Etc Light Comes On And Car Dies!
fpr000 replied to fpr000's topic in Fuel System & Induction Workshop
yeah was reading voltage drop for tps sensor, and ford reckoned it was a faulty sensor ive got it, just gotta put it in now. -
Hi guys just throwing it out there as its pissing me right off. every now and then the ETC light comes on and car dies till I shut off and restart and all fine till it does it again. Ford have told me to replace the TPS as its a common problem with the BA BF series and that's how theyve fixed it. Has anyone else had same issues?
-
Nice, just needs lowering and the mud spats removed
-
hey bud I just installed this very same comp wheel on mine and.......wooooow what an improvement!!! the F6 ran 276kw at rears w/ 60lb injectors and gss340 fuel pump and tune. I had this installed the other week and ran it and now its runnin 314kw at rears and I havent re-tuned it yet. Highly recommend it.