KeddyXR6T

Hopefully we get a good turn out from the site last year the was 1500 cars, to all those who are going see you down there

?? what

Anyone Going To Cruise for Charity Tomorrow??

Hey People Cruise for Charity Is Tomorrow Sunday 21st Is anyone going why is there no topic on this anyone interested can we get a topic on it ????

BAYSWATER AUTOS CRYO'D AU REAR PLANETERY solved my my issue's the custom C1 that was in there was snapping the standard rear planetery gear, as well as that did bf shims and replaced the bands while it was apart Strong Box, Firm shifts happy with the work price was very attractive as well

Ended up going to Tim at Bayswater Autos has done well I'm very happy Snapped rear planetary gear (rear planetary had snapped in 4 previous rebuild's) and a slightly worn c1 was the problem Solution AU cryo'd rear planetary, modded c1,bf shims as well he re did the shift kit and bands great box shifts firm got 5,000km's on it so far all good

I first seen pictures of the Subaru end of last year thought it looked rad then a mate who works at Cannon Toyota dealership brought a 86 GT past my joint the other week and all I have to say is if your over 5.5 ft in height you will never be comfortable in the thing, I have no idea why they pretend you could actually have a person or even a small animal in the back drove like a 350z with even less power up top but geared well feels like your flying when not really going anywhere at all honestly couldn't see anyone buying one of these at the price

The original brackets don't center the cooler so .... get 2 bricks sit the cooler on them stacked and the cooler centered, get a 150mm longer 2.5 inch top intercooler hose that is on there from stock, the bottom hose will pull over with a little force and make some brackets that reach the original holes on the front bar support best to use some 25X3 flat bar for the brackets, (you can bend the 90s into them with a hammer and vice) 2 will be enough and you may need to bend a A/C hose that may get in the way of the bottom right corner. Stick the front bar back on beauty

I work for Yarra Trams in infrastructure as a health and safety officer, (cert 5 OH&S) the law always changes and everyone are whiners lol. I get where your going with this your exercise and sport science degree with the OH&S would be good, motivation is a big thing in OH&S so Im sure you have a angle for employment, the money is in Risk Assessment so keep that in mind.

lot of work

???? handbrake skids ???? why when you have 300rwkw just throw it into the corner way cheaper just costs tyres and fines

that sounds like you have 2 different issues

I remember the first guy I was taking mine to cost me a turbo never did the oil line filter bang rite on 103,111 aswell as the infamous flash and dash the stock valve springs were at the point of nearly detonating the motor lol good times. donating 20 to this site was the best money spent towards the car never had a problem with anyone of the recommended businesses from here aswell as advice from members here

haha that's the spirit

LMAO why didn't ya get a photo

The josco set is alright but next time use autosol ally polish much smoother finish longer shine. Next time dont sand it just use a pickling fluid ie meguires chrome cleaner to bring the sh*t to the surface and give it a good polish she will come up better then new

if you watch the vid along with this post it all makes sense

the custom intake sounds mint And no speedo is a excellent defense to a speeding fine lol