Tocchi

Phil, for you, if easier you can have the rest of the car for $300 Covers my costs.

Shannons for cars and house Steve. Any of you guys need BF parts? Getting a BF wagon dropped off Thursday night as a parts car ... Looking to grab what I need off it, then ducking it off cheap. Whole driveline available. I've just grabbed steering wheel, roof lining, brake booster and rear leaf suspension

Steve - I comment tagged you on facebook photos, as I can't post on here using tapatalk ? Or is that just antilag

Black dust, a lot, means they work... But it didn't pit my dish like the stock pads. Street use for the pads came second, so I didn't mind noise dust etc ... All I cared was they pulled me up into CAT corner after I applied the brakes after the old pit exit haha

Pmu HC+ pads were great pulling up my barge. But squeaky on the street

Talk to Scott Dawes. He has 20" FR1's ... As they are 1 piece they don't come in many different offsets etc, unlike the 3 piece ones I had 5 years ago, where I could chop n change every month if I wanted to

Deka injectors are junk in my opinion. Went from 80% duty cycle on 2433cc Deka injectors, to 45% duty cycle on 2200cc Bosch injectors... And I made 60hp more at the same time.

Back in the day Phil I went through FTG for my brembo 6 pot full kit. New - $2k

That's the one. Was Cryo treated, then all the burs / rough edges removed, balanced up, then polished Just doing little things that can aid the engine life

Antilag has more updates, well actually www.facebook.com/SandTrapMotorsport is most up to date

Yes, a white FG F6 ute. Perth car. Just rolled the fronts.

Lol long time between updates Blew up motor firing me into a wall, oil and metal everywhere under Tyres etc. On a stock BA motor I made 680rwhp at 28psi, revving to 5900rpm, with glide, stall, 9" and slicks on roller Dyno haha. Best time so far: :-/ Ran a 60ft of 1.23 off the foot brake at 10psi. Got off loud pedal at 150m, rolled through to the end for a 12.2 at 90kmh (57mph) BA/FG Engine getting slowly built now. Big cams Grout filled block Resin filled head Precision pt6870 Tial 60mm Aeromotive 11105 mech fuel pump Etc. I'll update proper when there's more of one

Haha hopefully not for a while, done my research, I'll onsell the bf 6t long motor, and buy a BF wreck .. Swap everything over. Then sell the rest of the crap. Works out better cost wise. Stripped a VX R8 in about 12 hours combined so this shouldn't be too hard given I know the falcon unlike the Late model camira lol

All good - sorted a BF 6T long motor today. Pickup on weekend.Is the BF NA map sensor up to the task for low boost ? As I was planning on taking the bolt ons off that

Yeah sorry from 2012 I think? Haha

I ran stock Dark argents on the FG F6 ute - but my mate Royce is running R35 GTR rims on his. I ran 19x10 +10 and 19x10.5" +23 on the FG XR8 sedan

First time on this forum is probably 3 years - a zillion PMs about offset and widths regarding FG's haha fml. Well, I'm back. And happy to help.

* 510rwkw it was 680rwhp at 28psi with 5900rpm limiter through the glide/stall/9"/slicks Yeah I'll wait for Luke I'm unsure if BA DCVT hardware would conflict with BF DCVT software etc.

Guys, you know of any BA BF XR6T factory piping & FMIC going dirt cheap? Picking up a daily BF wagon in a fortnight when I'm in Perth, and thinking I'll slap a BA/BF XR6T engine in it, run stock piping etc, and have 300hp for a cruiser. Was tempted to go FG motor but cbf dealing with the hassle of sumps & rocker change. If anybody knows of a BF turbo motor, full, up for grabs, at a decent price, let me know Would installing a BA engine into a BF cause dramas?

A lazy launch at 10psi netted me a 1.23 60ft - step up your game Steve

Achilles 123s are not true semis. More like semi semis. I've used RE55's (FG F6 ute, stock, skatey on them), R888's (FD RX7 - gripped well) and Pirelli P Corsa Zeros (slightly less soft, on FG XR8 - stuck like sh*t to a blanket, love them)

sorry will have to pass.. not too keen on paying $160 for go karts sorry

I was running 235 street tyres for skid tyres... but was running 255/35or40/R17 RE55s for track no guard rolling at that point

unsure.. they went on a BF XR6T here ... so I guess they are fine lol