Jump to content

Danxr

Member
  • Posts

    67
  • Joined

  • Last visited

Reputation

12 Good

About Danxr

  • Birthday 23/07/1989

Contact Methods

  • MSN
    daniel@devcobuilders.com.au
  • Website URL
    http://www.devcobuilders.com.au
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Perth WA Duncraig / Wanneroo
  • Interests
    Working, Running my business, fast girls fast cars

Recent Profile Visitors

1,112 profile views
  1. Happy Birthday Danxr!

  2. Happy Birthday Danxr!

  3. Is it still doing it today
  4. Hi Fellers, Anyone had this issue before, when the car is cold, normally when I start it up I don't even put it in gear until I see the temp gauge move but recently when I select drive the car has this odd vibration cannot feel it in reverse or park but after the car has been driving for a little bit the car is smooth as For some reason when I did the oil change I used a different oil was full synthetic I've always used mineral oil Thanks Guys
  5. Nah cars all standard - going to check it all out, earth sounds like that could be the problem one thing is it's really noisy through the radio I can hear the whine
  6. Hi All, Can anyone tell me where the engine coolant temperature switch is located on a bfii xr6turbo presuming this is whats causing my thermo fans to stop working randomly they working fine for maybe 1 or 2 months without fault and then suddenly they do not operate properly, I can hear them on low speed only but never goto high speed and yep the car heats up and begins to get hotter then normal Help!!! Daniel
  7. that's odd I'm with AAMI and have $450 in the turbo car
  8. Hey fellers, Has anyone done or thought about raspberry pi for the carpc I'm wanting to know if it's possible to use in a BF falcon with premo color icc I've most of the stuff needed from previous projects such as 1 - Touch screen overlay + drivers 2 - 2 spare color icc units incase I damage 1 3 - raspberry pi 4 - Centrafuze for windows but not android other OS's I'm missing something to convert HDMI to what ever that falcon screen uses composite I think - Dan
  9. Here is something you'll may like an explosion view of the blower components air/heat with prices Section_20130823_1441.pdf
  10. http://www.ebay.com.au/itm/BA-2004-FORD-FALCON-HIM-MODULE-SINGLE-ZONE-FREE-POSTAGE-/141040607775?pt=AU_Car_Parts_Accessories&hash=item20d6ace21f
  11. I don't know how to tell if the HIM module is stuffed, if anything I can still hear the blend door motors swapping over from hot to cold and vice versa air con compressor kicks over, I haven't hooked 12v up to the cabin fan as of yet as I think there is no point as no power is at the main power for it
  12. fuses seems to be in good order
  13. here is my 2007 bf series 2 xr6 turbo body + interior is in mint condition and most of the car original
  14. Fellers, Today my cabin fan stopped working it has been replaced before but that's not the issues over the course of months my mate lost him license so I've offered to drive him around as a good friend does, anyway as he sits in the passengers seat he tends to kick the cable for the cabin A/C fan well today those 2 wires shorted out and something went pop with some smoke coming from the very left hand side of the passengers what looked like near the passengers side airbag, I've got those wires and there is no power according to the multimeter any ideas is there a fuse somewhere????? Help would be grateful Regards Daniel
  15. Happy Birthday Danxr!

×
  • Create New...
'