wilba
-
Posts
828 -
Joined
-
Last visited
Everything posted by wilba
-
To easy.I might try that
-
What sort of centre barring is that?
-
This is what mine looks like
-
So your center barring isn't even spaced! By the look of the pic. I really dnt no what to do my is spaced that The shaft is just about straight from gear box to diff. at a guess about 50mm
-
My Ute vibrates at at 90kph and about 140kph and under acceleration. I have a cv at the diff and a uni joint just before the centre barring.
-
So does anyone no how many mm should the centre baring be spaced on a fg Ute ? . I'm over The vibration
-
So does its mrk2 bar fit on a old fg? And has anyone modded the mrk2 front bar like cut the plastic where the cooler is like on the mrk1 cheers
-
I'm keen on this thread . As I took the ute in to get gaurds rolled but the roller didnt have a enuff force to roll the lip because of the fail offset of the hub
-
Im goin to try these bang for buck tyres Accelera or Achilles dnt no witch one to get.
-
Help I'm after 275-30-20 for around $250 ?
-
I just got one made from hardy . All the above $1150
-
this
-
Just spoke to hardy and he said just replace the tubing. cv and ceter barring are fine !!!
-
Yea I waiting for them to ring me back .how hard is it to take the tail shaft out ?
-
Well I want now so someone hook me up hahha
-
mal said they use them for other cars. Ei he said they have a ss with a xr6t shaft in it . Why would I need to shorten it if it was lowered the standed 1 is doin fine ATM :-/. . Why carnt a shoP say oh yea I have done one of those and I have all the measurements here ."ok cool I will have one of those thanks hahaha
-
Yea I would say so ford freak . Why is it so hard I have money waiting to buy a new one but they all want the old shaft . I live in qld sunshine coast and no one want anythin to do with it . I rang mal and they want $2250 and they want your old one but I dnt have $2250 for a tails shaft. I would be happy to pay half that though
-
Ford freak I think we need to buy one I'm keen
-
I'm keen to get one as well fg ute
-
And jd custom make a surge tank cheaper them both listed above . I have one and have had no truble with it
-
I no wat ya mean wpn270 like winding 3rd and 4th out and it feels likeyou need shorter gears even with 500hp .
-
Stand Alone Zf 6 Speed Trans Cooler Fgxr6T (With Pics)
wilba replied to Murphh90's topic in Driveline Workshop
Good stuff might attempt it next week . I thought about that second one but wasn't keen on drilling a hole in for 1 of the lines -_- -
are they standed parts or bigger or stronger ? . Thanks for the reply
-
are they standed parts or bigger or stronger ? . Thanks for the reply
-
Harvo wat is hardy spicer unit? I no they do drive lines but Can please ezplane it a little better like what you got from them cheers
