insanegrunt

Thanks for the advice so far guys! I should mention I have a built ZF and built tailshalft.

First time out with the 275/40/17's MT ET S/S Radials and got a PB of 11.9 @ 121mph in my ZF FG XR6T But with a 1.99 60ft. Most 60ft times I've bene getting are 2.0 or 2.1 and can't seem to go past the 1.99 Any advice on how to drop my 60ft times? Got XYZ Coilovers in and set on soft front and rear Stall on foot and hand brake. Tyres on 18psi Cheers in advance!

So in the end it made 308rwkw/413rwhp with very little mods. Stock engine! Process West Stage 2 Stealth Black Intercooler kit Turbo muffler delete Stealth black Areoflow/Earls Oil Feed Line Kit X-Force Exhaust - Mild Steel 4" Dump pipe into 4" 100cell Metallic cat into single 3.5" system, one muffler 1000cc Injectors Xcal 4 Tune & ZF Tune Before I got the mods done I got a built ZF cause mine was already on its last legs so I went all out and got a 800hp built ZF box with external trans cooler with thermo fan bu Girloys Automatics in Toowoomba Stock engine, so no valve springs, fuel pump etc. Super happy with the power but the torque and way boost comes on is from another world! Absolutely love it, so aggressive and spesh with the built zf can just punch it and it'll just fry and wont quit!

Thought I'd finally make a thread on my car, purchased her back in Oct '14 and this year finally got around to getting it tuned and ready for Powerplay May '16 and made 308rwkw/413rwhp Got the car pretty much exactly as I want it, but as all would know the power bug has bitten and I want more! Anyways lets rewind back just a bit.... This was the day I got her and now..... and the powarrrr

Haha nope, defs not photoshopped

Here's mine, XYZ Coilovers all round

Dont worry found a good power source. Admin Please delete

Hey guys, I've got the gauges all ready to go just need a power source, where can I tap into in the FG xr6t?

Ran my FG XR6T a few weeks ago at Benaraby Raceway, Started off the night with a 13.1 and reeling off another 6 passes doing 13.1! Talk about consistent! around the 4th last pass for the night I cracked into the 12's running a 12.9 @ 106mph. Was so ecstatic to drop into the 12's with the factory powered '08 XR6T on street tyres (cheap goodyear blue streaks)

Great write up paul30! Was very helpful

My Ute wasn't locking. Go to lock it and the drivers door locks but go lift up the handle of passenger side and it unlocks and made a evil grinding sound. Today I replaced the gear cog with a new one, old one completely snapped. So I thought I fixed it. put it all back together and the door no longer makes evil grinding sounds but still same problem of locking and passenger side still opens... Anyone know what the problem could be? or did I miss something? pre sure I put it all back together correctly

Anyone know the size of the speakers?

Hey guys, Looking at replacing the speakers in my BF XR6T Ute. Not wanting to go a sub and don't want to jeopardize the space behind the seats so replacing the speakers is ideal. What size speakers are in the doors and behind the seats?

So there is another plug for my oil pressure gauge? Or use the aux and oil pressure connectors and connect to 4pin and run from same connector/power?

I'll have a looksie

Hey guys, I went to install the ASL Aux booster kit in my BF XR6T Ute, it doesn't have a aux or anything hence why I brought the kit. Went to install it over weekend but when I had a look the Electronic oil pressure gauge I have is connect in one of the blue 4 pin connectors in the fuse box under steering wheel, so I cant run the aux kit. Am I able to run the oil pressure gauge up to something else to get power? So I can run my gauge and booster kit?

So I am considering a set of 20x8.5" status knight 5 wheels if I run a 30 profile tyre instead of a 35 it shouldn't scrub?? And use an offset of around 36

I really like the drift tecks and starcorps, do they come in 19's? And black? Or gunmetal colour? I spose silver wouldn't be too bad

haha nah there a different wheel it had black with chrome lip. Got pics of these wheels henz?

I have been looking at the Zenetti masquerade, Versus Wraith or any wheel that's 5 spoke that's Black with machine face Most wheel dealers wanna sell me 20" and hardley stock 19 finding it to be a lot harder

Thanks! Id prefer 19" wheels, just cant find any I really like. Any ideas? And yeah Henz shaneo's old ute, Ive got a lot more mods on it now though

Hey guys, After a bit of help here. I'm looking at a set of 20x8.5 wheels with 245/35/20 tyres with 42 offset I think he said for my BF Ute, just wondering what they would it look like and would they fit good without scrubbing etc. The ute is already lowered with pedders coilovers in front and lowered leaf springs rear I was going 19x8.5 and I know they would fit fine. But got a better deal on 20's but am not sure if going that extra inch in wheel size will effect the tyre wear by scrapping etc..?