R UTE

Last time I went down they were on about having to get a new helmet, something to do with the new AS/NZ standard or something, anyone know if ill get through with the same helmet again??

Tis me!

Hey mate nice result Does the anti tramp kit do the job??

Yes mate ive had this done - Allan (Ninka) did it for me. 6 Hours in his garage and it was done. Then off to ford for a reflash. Check this thread gives you an idea of whats involved. http://www.fordxr6turbo.com/forum/index.ph...c=26015&hl=

Dont go there

Well done Muzza Any one got details on the phantom performance ute?? Mods Power Tyres 60 foot time??

Not sure on the mods but quickest manual I think is an XFT F6 sedan 11.51 @ 122mph

Ive got a LPG BA RTV and it uses 18-19 litres per hundered. But it is carring 400-500kgs of steel tray, toolbox ect. Even with nothing on it still only gets about 17L/100. I just thought it was normal. Still heaps cheaper than the T.

Count me in. Looks like ill be able to make this one :ifiusethisimafag:

I paid $600 2 years ago from Lynford. Have you looked at getting in straightned? WA Diff Center in Myaree or Veem Engineering Canningvale can do it.

109 mph 300rwkw 6 speed manual MT streets

Reading this thead brings back bad memories, Sorry daggo I too spent close to 10K at Slackos Everything he put on the car has now be replaced. (except valve springs) Unichip Exhaust 42' injectors clutch And a few other bits and pieces End result was 326hp on Slackos dyno and 330 hp on MCE dyno it does not read that much lower! And his excuses why he could not produces the bigger numbers like other tuners over east at the time was that they have better fuel and better quality of air. I see you have the edit, Does tim do his own tuning with the CAPA software? Unless things have changed alot (this was back Jan 06)I would recommend you take you car else where. Russ

No still not working but ill ask Simon to have a look when he does the tune, how bout yours?

Hey Luke ill be keen for sure, just in a couple of weeks - dont have a tune ATM. Nizpro kit will be here this week and hopefully fitted and tuned by the week after. Old school no kidding - the ute is 5 years old next month, best part about that is ill finally own the black money pit! Russ

Hey mate I brought my gauges from egauges over a year ago and have done what they are asking you to do. I had no problems with them, they sent a tracking id number and I the gauges arrived 4 days later. I was very happy with their service.

Kilometers are stored in the dash cluster, I know for sure as I have just changed mine over. Easy to do 5 screws. 10 min job.

Just did some measuring of my utes - interesting :fear (5): BA 03 XR6T width between wheel arches is 1150mm BA 04 RTV width between wheel arches is 1200mm Is there any reason why you cant just swap the liners over??

Yeah mate ive bent my axles. Try your local diff/driveline shop they might do it. I took mine to WA Diff Center and they straightned them. Good as new. And alot cheaper than new, think I got quoted about $600 for a new one. Russ

Sure can mate, I have done this with a BA mk1 ute - Well I should say Ninka did it for me I helped. Took about 6 hours and then back to Ford for a reflash.

Hi Benjam It is just possible to get a 1/8 NPT sender into the standard sump plug. I had the use of a lathe to drill out the sump plug and then just hand tapped the hole. Its was a bit touch and go but no leaks yet Russ

Check this out worked for me http://www.fordxr6turbo.com/forum/index.ph...c=27098&hl=