kevo
-
Posts
286 -
Joined
-
Last visited
Everything posted by kevo
-
if you are sure you stopped asap after seeing the no oil pressure sign on the dash I'd say you'll be fine. If it was me I'd pull the engine out and inspect on a stand to have peace of mind, put in new bearings if you are worried, new billet pump and housing, put the engine back in! So did you hit the limiter to the point where it backs off the motor a bit?
-
yeah dude
-
good luck with your parts and that mate but the bike is going to be near impossible to track down unfortunately. Going by previous motos being found again, any stickers and cheap bling will have been removed. To be honest with you it looks to me like someone has spotted your stuff from either here or antilag.com sucks ass, sorry to hear dude
-
how do you know if coilpacks are fuct? Loss of power and misfiring in higher RPM? I may be in the same situation as others as im on 330+ on original coil packs..... is that ok ??
-
I could smell your tyres all day from motocross hahaha
-
When I bought my car the previous owner had a sh*tty piggy back computor on it and caused some dramas. I had it ripped out when it was having issues and it was covered on fords warranty once it was flshed back to stock. all I had on it was a full turbo back exhaust when it went back to ford for warranty repairs and they didn't ask any questions and fixed the problems and all was well, So a full exhaust never effected my warranty! Hope that helps mate
-
Hey guys, I wasn't in that dust storm (im in Perth) but I pulled my front bar off and cleaned the filter while it was off to find the thing dirty as hell after 7500kms! Its mostly city driven apart from a few country road trips. its a K&N pod filter, but I found sh*t inside the element! THIS is what was on the inside of the rubber mounting bit when I ran my finger over it....... WTF!!!!! Is this normal?
-
Yeah that could be the factory paint, mine was doing that too
-
God damn. I just dropped my front bar off to be reapired after the dude I bought my car off blew it out on a kerb. I hope this isn't going to be too expensive now that you have said they are un-plastic weldable! My one actually had a chunk missing out the front of it and was covered in racec tape (made me so disgusted to look at it that way...) Ill let you know how I go getting it fixed
-
don't act like a dick and your fine, I have been unfortunately pulled over heaps lately for small infingments like 10kph plus speeding etc, and never have the cops looked twice at my car, it has the big rapids cooler kit on it and a big venting BOV too aswell as a 421 badge beside the F6 badge on the rear, So to answer your question, no you are fine with these mods!
-
I just ripped "GRID" and that is a pretty awesome game, realistic physics in vehicle control and that hey
-
yeah its a bitch, I left the icc in and just indid the right hand side trim unough to get my whole arm into the back and twisted it loose and put the new unit in. PAIN IN THE ASS JOB IT WAS!!!
-
I somethimes have a bit lower in the rear tyres, around 34 36 psi, so to help the rears grip the road better. well that's the idea... ahhaa
-
yeah dude, that is definately rude These is nothing wrong with the Xcal2, I use it and so do the majority of people on this site! I'd tell him to go f*ck himself ahaha,
-
dude something doesnt sound right here, There are heaps of guys on this forum that know more about this than me, but I have never heard of a failing timing chain on these engines. Oil pump gears are a definate weak link in the barra chain and are common for rev limit drivers haha, Also, why the hell is your clutch slipping at 35ohp with a fpv twin plate clutch? that too doesn't sound right, (unless its smoked)
-
cheers hdj80 ill have a look on ebay for that stuff, otherwise I was going to get my friend to bet me some from a certain boat shop in Balcatta, perth, and trim it around the wheel arches, Cheers guys , ill let you know how I go and throw up some pics if I get onto something good, Oh does the FG have the same tray as BA BF?
-
Hey guys, Has anyone ever put marine carpet in the back of thier utes? I think I will now after seeing a mates VE with carpet in the back and it stops everything sliding around, as im always loading the back up with bike and gear and pit tent n sh*t for racing, Im thinking marine carpet should be fine???
-
yeah I agree with man-pants, the seats are way too high, for driving events my helmet toutches the roof lining. Im pretty sure the passerger seat is lower than my drivers seat too. WTF
-
are you sure you want another fast car? I can't be the only one that thinks this right?
-
god damn americans hey. no idea
-
Yeah I have the T56 6 speed manual, great gearbox in terms of manual, but when I upgrade to an FG F6 ute in a year or so, im going to go for the 6 Auto. I can not pull my Tornado off the lights fast at the moment, I try practicing launches but under pressure I always spin too much, no one with a 6 speed auto complains, But racing around in a 6 speed manual does feel pretty awesome!
-
I found this turbo at the long term carpark at the airport, had a big cooler and tripod gauges setup so figured it has been 'adjusted' and maybe someone from here?
-
f*ck yeah I love this weather - every motocross track in wa is awesome after the rain
-
KABOOM!
-
ah yeah while its out if you don't have one allready, definately fit an ETM turbo oil feed line as its hell doin it when the engines in! good pics mate, funny doin it on the street haha, good stuff
