Tree Monkey

lol, at least you weren't dumping while posting![/quote] i just want to know if the group buy prices worked out for the people i pm'd

call this no 02 4927 6666 and tell them tree monkey told you to call. I was quoted around $1040 for the same setup but in mild steel only, to my door.

saw a blue xr6t on wynnum rd tingalpa with the xr6turbo .com sticker low on the back glass. Just wondering how many are in the wynnum/manly area?

puss

puss

I have one word for it UGLY the whole front is wrong. The extra bumps and lines and crap, looks like it's a crack ho re with anorexia from the front. The b series is tuff from the front, aggressive like a pitbull about to fu(k you up. And those nice tr magna door handles?????? NOT

if you are only worried about the discs shattering just change them to the DBA 5000/4000's

who ownes the green poon at manly? or the silver one at manly west?

NIZPRONIZPRONIZPRO or www.racebrakessydney.com.au

just think a f6 tune as your base tune and then more on top of that and when you go to sell it they get the f6 tune and you sell your flash tuner

sell whats on it and put the AP set up that nizpro use on it.

it's most likley a pre ba xr8 they are talking about eg au/el xr8. There's one on ebay now that looks like an ea-au xr8 t5.

[quote name='Dagabond' post='633691' date='Feb 13 2008, 02:49 PM']No post's for a month and nobody telling of results did this go through or not? 24 hours to deletion......[/quote] all who were intersted i gave the number to. I would be nice to know how others went.

yes it was a 03 ba t5 to start with but I was led to belive that the tailshafts on the na6's are differant (thinner) than the t's and 8's

I have just secured a t56 out of a tornado with under 10000k, from fly wheel to yoke but I have hurd a rumer that I may still need a tailshaft as it is going in to a former na xr6. Can anyone conferm this ?

I tried all that but got the best fit by glueing the old tabs on. Just for every one to know thases guys give great customer servise on there product. They called me a few times to sort out any problems and seemed concerned of any product fults or problems. The only reason I am not useing there pod is I realy wanted the fpv look (yes I have the wank start button) but there pods face the driver better than the factory ones. It is a good product just needs a little molding/help to fit great. Without feedback they cant fix or improve on the product.

I got one and I had the same problem and I found that the guages (cobolt) dident fit flush. As for the fitment to the dash I just broke off all the tabs and plugs of the old panell and glued them in place so it locks in like the factory one. A day later my fpv ones turned up so now I use it.

It looks like a cheaper option over the gen fpv items. Has any one used them? I watched as one of the fpv drink holders sold on ebay for allmost $200 on its owne.

Has any one seen this befor:- FPV SILVER INTERIOR KIT $375.00 FPV SILVER INTERIOR KIT Click to enlarge THIS KIT IS IDENTICAL TO THE FPV INTERIOR. THE PAINT CODE IS DIRECTLY FROM FORD AUSTRALIA AND THE PAINTING PROCESS IS SUCH THAT IT IS AN EXACT MATCH TO THE ORIGINAL. THE PRICE IS BASED ON AN EXCHANGE SYSTEM WHEREBY YOU WILL BE CREDITED BACK WITH $100 ONCE YOUR PARTS HAVE BEEN RECEIVED SO THE ACTUAL COST IS ONLY $275. IF YOU WANT TO DRESS UP THE INTERIOR OF YOUR BA OR BF THEN THIS IS DEFINITELY THE WAY TO GO. I CAN ALSO MATCH THE KIT TO THE COLOUR OF YOUR CAR USING THE SAME PROCESS.

there's a fuel cut device located in the kick panel on the left hand side. Maby it has been triped???? ,you just have to press the top for the fuel setup to work.

pull out the fuze for the fuel pump then crank it over to clear out the fuel, it may even start for a sec then put a little fuel in the T.B to see if it fires up and tries to run. Maby check the tps is hooked up befor you do this. At least it will help narrow down a few things.

iIthink when they list size like 2.5" it is the inlet and outlet size not the body. The body size is usualy around 4"+

I got a quote for $750 including springs from a nizpro agent in brisbane today. So that's like $450 for fitting drive in drive out. I know where I am going.

[quote name='mrdamo' post='622497' date='Jan 19 2008, 02:30 AM']+2 Any chance of a bigger cat option?[/quote] THE CATS ARE ONLY 3.5" IN AND OUT THE BODY IS 4" OR 5" ALL WHO WANTED ITEMS HAVE BEEN PM'd IF I HAVE MISSED YOU PM ME AND I WILL GET BACK TO YOU.

[quote name='Joey' post='627869' date='Jan 31 2008, 08:29 AM']Is this gonna happen still Treemonkey? Just checking cause i might have to order a cat from RDP otherwise :S Need something by next week...[/quote] because every one is in differant locations i will pm the people who want one with the sellers info and you can have them send direct to you i will work out cheaper then 2 lots of shipping