Jump to content

arronm

Gold Donating Members
  • Posts

    9,520
  • Joined

  • Last visited

  • Days Won

    119

Everything posted by arronm

  1. Go talk to your tuner. He will tell you what he did and why he did it. Didn't you discuss power goals with the tuner before the work Didn't he tell you what he expected it to make with your mods. Is the tuner not a well known shop.
  2. Maybe you have a skinny rod motor. If so those mods were a waste of money. If not turn the boost up to 18psi. Should go close to 400 on 98.
  3. Mine is wired off the battery with a relay. Just get you tuner to install it all when you get the injectors and tune.
  4. Fair enough. 375 is heaps then...
  5. Rebuild with 6r80 shaft and get back to big power.
  6. In that image there are 4 locations it can be leaking from. Hose at thermostat. Thermostat to housing Turbo feed. O ring at pipe.
  7. No unfortunately the mechatronics unit and the clutch fibres are damaged. The coolant degrades the glue.
  8. The noise is the converter trying to lock up. Transmission has milkshaked and is dead.
  9. Looks like it needs to pivot. So the use of a nyloc and not fully tightening is the key.
  10. Looks tuff. Which colour mustang is yours and which is fluffs. Bet yours is gunmetal.
  11. I got out of it cheap at $4200. I installed mine myself. 3500kg. I bolted the hydraulic unit to the wall
  12. Ba bf. Straight swap. No programming. Just match high or low series. Don't worry about Keith he doesn't even work on cars.
  13. You got tickets to your girlfriend .
  14. Steam pipe has thick wall. just use a 409 ferritic stainless.
×
  • Create New...
'