TRA1NR

They can be difficult to put back on, you sort of have to lift and slot it into place in the middle, put the two middle bolts in, then clip the sides in and keep going. Unless you slide it in at the right height in the middle it won't go on properly. Just have some patience and play with it and you will get it.

A mate of mine made this new ford commercial: http://www.youtube.com/watch?v=00jyd-p-DiA

Hi Guys, Have been shooting a fair bit over the last couple of months and thought I would chuck up some of my favorite pics: Squeaky Beach Sunset Kayaking in Norman Bay Starburst Sunset shot from Pillar Point (Wilsons Prom) Golden Embers - Same Location Startrails at Norman Bay - This is 60x30 second exposures stitched together. Obviously there was some movement in the tripod, I am keen to get out and try this some more Ghosts of St Kilda Pier Panorama - I couldn't be bothered cloning out all of the ghosting, I think it kind of adds to the photo Grantville Sunset Panorama Depth/Perception - Long exposure ND filter sunset Deep Grey - Long Exposure ND Filter after sunset Let me know what you think! Good or Bad!

Definitely with Ice Hockey, they have a face off after every goal.

Shy is right, my car is not likely to change any time soon, already put too much money into it! I still have idea's though, brakes, colour coding, shaving, debaging, etc. I tend to agree with others, I drove a BA XT until I got off of my p's that was stock aside from 2x12's in the boot! Then once off of my p's got a BA Turbo. On the other hand, I modded my current car for me and although I appreciate kind words from others I have done it in a way that I like and enjoy driving everyday. Each to their own, you have a great base for a nice cruiser which ever way you go!

Price both ff, I think you will find pedders to be quite a bit more expensive.

I meant it is not up to me to volunteer or appoint someone else, and as Dillz said, I don't need to quit for someone else to step up.

It's not up to me pazzo. Unfortunately my priorities have changed and I probably won't be much of an active participant for the foreseeable future. If someone else would like to become a CC that is up to them to put their hand up and the moderators to decide if they are the right sort of person for the job.

Coincidence Pazzo. I don't have the time or the inclination at present Ben, there are plenty of keen people out there that are welcome to organise a cruise if they wish.

Just not really interested in the forum at the moment mate, only posting when I actually spot someone or have something constructive to say.

Spotted a white FG T, debadged, black wheels, WA plates, turning onto the pakenham bypass from kooweerup rd around 7 this morning. got a little sideways, looks tough, anyone here?

Over my exhaust, tyres, gas pumps, and music I can't hear the LSD at all!

Spotted Paulie a couple of times lately, on the Pakky bypass on Tuesday, and on McGregor Rd about an hour ago.

Pics Airstrike? What colour?

Yeah I agreed with jase, once you get a set or two you start to understand how it works.

I think it is et, I have more power on gas than I could make on petrol with the same mods.

+ Gas?

Thanks Smooth! I think because the spokes extend to the outer edge of the rim the rockstars don't look too small. I have found that with 245/35's on the front and 275/30's on the rear that the rears actually look bigger, and some people have thought that they look like 22's. I have the federal 595 evo's and the 275's seem massive for a 275. As far as legalities go, in victoria you can only go 1 inch wider than the maximum standard wheel width.

20x10 +42's should work on a sedan, you may need to have your guards rolled though. I have 20x10 +35's and before my guards were rolled they scraped on every bump, all good now though.

Do you have 9.5's or 10's now? If it is 6.35 + 6.35 that is only half an inch, so if you are going from 9.5 to 10.5 you are missing another half an inch.

henry meant half an inch, or 12.7mm

I don't think the 9.5's will fit at the front, worth a try though!Fitment looks great with those offsets at the front! I would love to run spacers at the front but I have enough scraping as it is even with rolled guards.

The led's will probably be t10's to replace the parkers, not the indicators. In not sure about the b series but on the fg the foggies are plug and play and just twist into place.

I see everyone has ignored you Mitch. Welcome! Where are you from?