XR6menace

LOLZ

No mate but thanks to another thread on here we are gearing up to tune on e-flex Really? srs

Cant find the comparison before and after dyno sheet jetter's , engine is stock botton end atm. Lo-torque did a before and after when my head was fitted it made 158rwkw's on the mainline and then 174rwkw's after the head was fitted and I went from a 13.9 previous to a 13.73 best Then I drove down to CMS and it made 177 on thier's Then back onto Elite's dyno and it made 181 before cams were fitted...

Yeah It all seems too impossible eh...

Yes mate many years ago...

I don't have to explain myself or prove something that cannot be proved to you ms700, anybody that has raced/worked around cars like yourself knows a Hi stall robs 10% or more depending on how tight it is .. If my tuner including my previous one, states my car has around 220rwkw factoring in the stall then that is what I will happily say. a dyno printout is only good for chest beating.

Cool he should be running 13s then ? Ask any tuner .. I have closer to 220 at the wheels mate

PM sent Marky... Open centre currently is good for a 13.4 and the G6E's are in the low 11's ? I have gone through 3 x lsd's and the spool only broke cv shafts mate... Also for those interested I am at a crossroads now because if I am buying rods/pistons I need to decide the optimum CR ? My heart says 12:1 but common sense says 8.5:1 Head is allready O'ringed and I have a copper gasket fitted , it raised my comp just nicely otherwise I never would have fitted these cams... I will ceramic coat the CP pistons regardless, I cannot believe everyone doesn't already do this ? The christmas wish list is around 380rwkw with NOS and a High 10 around 125mph If it gets boosted then with my Hi-stall/ low diff gears and 1550kg weight I would want a mid 10 @ 130 with 400rwkws and 20psi Up to the guys at Elite which way we go .. I know what I really want though.... a rear mount AND Naws !!

Oh ??

Never say never...

This is why I removed all that ^^^mate ... some still don't get it...

My list of mods.... So many changes over the years so let's just list what we have currently fitted eh? Relocated battery and extra earth cables added throughout engine bay Catch can New 02 sensor/TPS / crank angle/coils/plugs/alternator Bigger radiator High speed fan removed Aftermarket Cams Ported polished/shaved head Crow springs / Chromemoly retainers Portmatched intake with phenolic spacers Walbro intank Process west surge tank with Bosche 044 SS 75mm TB SS Growler Big Mouth 20% Underdrive Cooler thermostat 4495 Pacemaker's 3" titanium hand made exhaust Built 4 spd BTR PWR Trans cooler 3500 stall turbo tailshaft Fg cv shafts 4.10 open centre M78 XYZ Coil overs 27mm Front Whiteline adjustable swaybar and 22mm rear Rebuilt std brakes/ PBR stickers and QFM pads United 100 fuel or BP Ultinate 98 around 500kms a tank... Elite Custom tune 196rwkws The brains trust !!

This is the effort you have to go too to drop ET without a turbo ...

Uuuuuuuuurghhhhhhhhh erghhhhhhhhhhhhhhhh errrrrmaaaaaggerrrrrrrrrrrrrrrrrrrdddddddddddddd *PLOP* aaaaaaaaaaaaaaahhhhhhhhhhhhhhhhhhhhhhhh

My spider senses tell me it was a panel van turned into a sedan back in 03' and it used to be vixen.red Check under the rear seat as there may be a knife stashed and a baggy of cooch is still hidden inside the airbox oh and it may have a turbo fitted as well cheers

My first convertor that flash stalled to 4200 .. that caught me unaware, as the bbm switches open at 3800 and I was always leaving on the short runners killing my 60'ft... cost me $900 as well Here is a pic after doing a burnout at marky's house lol

Ok since ya asked nicely.... Bigger throttle body... The 75mm SS jobbie I don't think it was worth the $700 asking price I ran 13.96 with it but then ran a 13.90 with std TB with new TPS so yer dunno I have kept it on for the last few years though...

Yer but I got no boost ta smash malarky... when you gonna start taking pics bro? I've done plenty of skids around your place, I think you should share ya mad skillz with us ? How's stink goin'

Yer did a malware scan and even though it didn't pick up anything *presto* all my pics are viewable again Plus I gotta upload another 1000 or so depending on how much interest my build thread gets.. no rush though. I got another 5 weeks on the lounge yet

lol Bazinga !!

Hey mark how many posts do ya like in an average day ??

Yep if ya don't like it faaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaark off !!

Launchin' Fitting 4.10's is the best mod you can make to these things... Later... Gonna do this thread a bit differently ... if any N/A guys wanna know about suspension/ wheels/engine mods/exhausts/ dyno runs/ et slips/detailing options/what mods = dropping et at the track just ask ... Pretty sure I have a story and pics to cover whatever is asked ..x.. Darren.

Got my pics back .... Outback truckers is seriously retarded

Ya put it on toast hmmm yummmmmy