ALF05T

We all know CV dyno reads lower than elsewhere, the car did make 385 on that one and did have manifold leak aswell ( only had 2 figer tight lose turbo flange bolts in place) I only found that problem when I replaced the turbo but in hindsight shouold have relised when I could smell rotten gas from the drivers side. I am with haydog the car feels like 450rwkw, I know a few cars that made 460 on dekas comes down to the supporting mods.

for all the non believers out there this car did feel every bit like 423rwkw before his last tune, cold mornings 120, 140 km/hr would fry the tyres. Even though people only think its just a front wheel upgrade these new GTX turbos come on very strong compared to the GT35 turbos. Dont forget this car did make 385rwkw on the CV dyno, and felt alot stronger when I put the new turbo in! A tune on top of that and 450rwkw through a manual box should make 45o at the treads. CV would have got the tuning job but I no longer live in Sydney anymore so Heinrich is very well recognised here in SA! We have our drag strip back now, Should take the 68 Camaro down for a Burn!! My 2 cents

Oh yeah I should change my signiture now I guess

Haydog you got a great car mate! I built it over 7 years with much money spent and pain when thing didn't go right. But now the car is sorted part from the tune, should punish most cars on the road but be careful she bits hard! Good to see her go to a good home oh well looks like the 68 camaro will be in the shed for quite a while! Cheers Alf

Anyone interested in swapping there standard parts for my performace parts on a BA XR6T plus cash my way. Parts of interest are: - Atomic 960kw bottom end which will include long motor, gtx turbo, atomic valve springs, 60 pound injectors, process west cooler plenum/piping and plazmaman 4 inch intake in exchange for full standard motor set up including computer plus $10,000. The engine alone is worth 12k from atomic, turbo 2k, plazmaman intake 1k, process west set up 5k. - 6 piston brembo brake calipers fpv rotors including brackets in exchange for standard full front set up in good condition plus $1500 - Axis Hiro Wheels as mentioned and seen in previous posts for standard wheels plus $1000 Call me on 0421600247 for more info, preffered method would be to sell the car or return it to stock plus cash my way.

No worries, you are right Regency do suck when it comes to Vehicle inspections.

I used to be in the Navy and moved around alot so I didn't ever change the rego to interstate.

The car has always been registered in sa.

The car is SA registered so your stab is wrong regency not required.

Colour red GTX3582 turbo upgrade (power currently at 385rwkw. will need to be tuned) Atomic 950kw bottom end, billet oil pump gears, fat rods CP race pistons new block, new balanced crank 34 PSI Atomic valve springs PW intercooler/plenum kit Plazmaman 4" intake 3L custom surge tank with Bosch 044 fuel pump 60lb injectors Malwood option 5 twin plate clutch with alloy slave cylinder and braided line Short shifter 6 piston brembos 19x8.5 front and 19x10.5 rear Axis Hiros tyres 275 rear and 245 front marangoni mythos Cloth interior, standard sterio. All tuning done by CV but now I live in Adelaide so Heinrich is pretty well known. 77,000km imaculate condition 3 egg marks down odrivers side but apart from that body in great condition. Price firm I have been stuffed around by tyre kickers so please only serious enquiries. Oh yeah reason for sale is 2 kids, Wife and mortgage on one wage.

18500. pretty firm on price