rhys86

The link dont work. Says some required file or something is missing. Anyone else got this problem??

Has anyone got the link to this bonnet. I can't find it anywhere.

sensational!!!

I was looking at that one on ebay. Just wondering how hard it would be to install??

Does anyone know what would be the best shift light to get and how to install it?? Had a search round but couldn't find any on here. Any help would be great. Planning on putting the car down the 1/4.

What b&m shifter are you using??

Just wondered if anybody that has but in a b&m shifter for any of the above mentioned gearboxes has any pictures of the center concole area and what it may look like when they are installed. Just need some ideas.

I just purchased a clutch off ebay from Sunbury Brakes or something like that. The clutch worked a treat in fact to good that my poor old T5 is no longer around. The clutch was alot cheaper than others and was nice to drive.

Whats the power figure??

I am getting a c4 put in my car in two weeks and although it is costing a bit of money the box will be able to handle around the 600rwkw mark. I ddon't trust the 4 speeds with a little power put through them. I have a sh*tty t5 in the car at the moment.

I was just reading through the WSID website and noticed that it says for wicked wednesdays if your car runs quicker than an 11.99 the driver is required to hold a current ANDRA licence. Just wnated to know if that actually enforce this or what? Disregard I found what I was looking for. Should have used the search button in the first place.

Nulon 10-40 is what I use. May not be the best but it has never caused me a headache yet.

I'm out of this one. Car is going to Melbourne to get a manual to auto conversion by dynowog so I can hopefully run a 10sec pass in the near future.

I should im just lazy.

Sure did but all they managed to do was snap it.

Im working on getting the rest of the kit. Just playing with the motor at the moment.

Engine: 4L Turbo Exhaust: 3.5inch custom with hihg flow cat Suspension: Lowered with King Springs all round Wheels: 19inch Hannah deep dish Modifications: Process West Stage 3 Kit, Injectors, Full exhaust, Valve Springs, fuel pump Stereo Audio / Visual: Not as ye but soon will be Power: 330rwkw

Assuming its a 6 speed alot. Im prettysure its over 500rwkw so they can handle what most people will throw at them.

Doesn't the stage 3 PW cooler have the 3inch outlet which is dlarger than stock??

I had the same kinda sound on mine not so long ago nad what I found it to be was the hose that joins the throttle body to the crossover had a small crack in it. You couldn't even see it I had to take it off to discover it. Once I replaced the piece of silicon hose it was fine. I didn't loose and boost either just gave a wooshing type sound. Maybe you might have the same thing. Just a thought.

That sounds good. I hope to have my car back on the road by then its in a few pieces waiting for the new process west pipes to come. I will let you guys no.

Nothing special needs to be done. I just did mine and it was apiece of piss. Just disconnect the thermo fans, unbolt them from the radiator pull them out. The only tricky hting is if you have an aftermarket intercooler unbolting the air con condenser maybe take a bit longer. I have the PW Stage 3 cooler and it made it hard to get to the bolts, but after you get them out slide the radiator up and then reverse the process to put the new one in. Oh and don't forget to undo the top and bottom hoses and the overflow ottle hose. Im sure someone will add in more if I have forgot something.

If you change your cooler it is a must to get a custom tune. Depending on the qualiy of cooler that you buy it may cause your car to overboost and this could lead to bad things happening to your car.

The under battery intake has a limit of about 350rwkw although a few people have gone above with this. It would be better if you used a 4inch intake of one of the advertisers. The only other mod that I would add to the ones that you have already listed is a plenum of some sort. Than you should safely see 400rwkw easily.

that's fine mate just let me know when you do.