RegSpec

Is cracking around the top of the dump pipe a common thing?....

Wish I was closer mate.....it's a decent old haul down there from Macksville...😉

Been lucky enough to do the Snowy cruise with Gary a couple of times in years gone by.....if you get the chance do it.....always a great weekend...👍

Hi k31th... I thought I'd get away with it but since the H brace has gone I've started cracking the dump pipe around the flange where it bolts to the turbo... I've migged it up with some bracing around the top flange but I reckon it'll break again with the amount of weight hanging off it...🤔

Guys Im running a BF F6 with 4" dump, 6" cat and dual 2.5 exhaust... The H brace that supports the Turbo is buggered and I want to do away with it because its a bitch to get on and off. So I'd like to know if anybody has come up with a better way to support the weight of the front half of the exhaust system? The manifold, turbo and dump adds up to a lot of weight hanging by the manifold studs... I can make a bracket that will hold the system at the back of the cat but thought I'd run it by you guys in case somebody has come up with a better idea? Thanks guys....

Try replacing the oil pressure sender on the engine....😉

I've been told this is a different shade to normal FPV?.... I've now had paint mixed twice for this and still a mismatch?...

Guys can anybody give me the paint code for the grey metallic on the wing struts, fog light surrounds and front bar? BF RSpec Typhoon.....thanks..

I'll be up for that......haven't caught up with you guys for ages...;)

I fitted up a set of these two years ago.......done track days and road stuff.....no complaints for the money... I did think about increasing the spring rates but don't want to lose ride quality on the street.... http://justjap.com/suspension/coilover-suspension/oz-racing-suspension-c-554/oz-racing-coilover-suspension-kit-ford-falcon-ba-bf.html

I've got an Rspec Typhoon and I do track days........one of the best mods I've ever done was to fit a set of adjustable coilovers to it..... Turned an already good car into a great car......;) And don't think you need top shelf ones either.......the ozrace setup I've got on mine does the job just fine.....and the front and rear owes me less than 1500 bucks.

Was Carly who saw it mate....;)

There's a lesbian couple living next door to me. Really attractive and fit young ladies. I've got to know them quite well over the last year or so and have helped them out with a few tasks around the house and in the garden. Just before Christmas they said they wanted to thank me and asked what I'd like for a Christmas present. I was surprised when they knocked on my door on Christmas Day and gave me a new Rolex. They must have misunderstood me when I'd said "I want to watch".

No mate....she's in Wollongong.....;)

Last night my daughter leaves her place to drive a friend home......on their way up the street they see that some idiot has overturned about a dozen wheely bins and there's rubbish everywhere...... They drive on, talking about the senseless act of littering done for no reason..... Around the corner they see the police talking to a pair of teenagers on the footpath, don't think much of it until she returns 20 mins later..... The police car is parked off to the side, flashers and headlights on....... The cops are sitting on the bonnet, coffee in hand.....watching the same two teens walking down the road picking up all the rubbish and putting it back into the bins! Now there's a bit of karma right there....

My power steering pump has died and subsequently drowned my alternator in oil.....short of stripping it apart, what is the best way of cleaning it? It's still working fine but I'm not sure dropping it in a bath of degreaser is gonna do it much good. ....:/

Bugger.....wish I'd seen this sooner.....

I'm looking to remove the factory oil cooler on my F6....anybody know what's involved in this? Stuck my head under and I can hardly see the bloody thing?.....

I fitted one to mine about 12 months ago.....was a pretty straightforward job mate..... I'll have a look see over the shed and see if the instruction sheet is still over there.....;)

Spew......why does this have to one the same day as my mates 50th ff's?.....

I have No. 147 in Sydney.......details in my signature.....;)

You'll love em' mate.......had a set fitted about 3 weeks ago.......great wet or dry......;)

^^ What he said^^...;)