xr6tute

I have a ute.... I would like to change the pump myself, is it possible to do without a hoist ??? Thanks

thanks for your help mate...I was hoping it would be something that didnt require the removal of the dash. When you say remove dash, exactly which part of the dash needs to come out ? will it be the whole lot or just a section off it? thanks

I haven't used my heater since last summer.....but with this awesome weather we have had in Melbourne recently ( its shocking I am over winter and it hasn't even started ) I switched the heater on and all I got was cold air. Its as if the temp. selector is jammed on cold... has anyone had this happen in one of these cars before and if so what was the problem. Thank you

thnks mate

Hi Guys, I have a leather handbrake cover that I would like to fit to my xr6t. Just wondering what the best way to get the existing cover off is ? I can't see any clips or screws, I figure I just have to yank on it real hard, but I don't want to break anything....Any ideas ? Thanks

[ Thanks mate

Hi, Has anyone fitted these in the fog lamps of a T yet?? I want to do all my lamps just want to know what they are like to fit to the fog lamps. Thanks

[quote name='xr6tute' post='786711' date='Dec 15 2008, 07:20 PM']Hi Chris, What sort of gains would you expect out of this. Also what will the pipe to suit be worth? Remember I already have you piping on the car. Thanks mate.....Ah and I got the hot side today thanks again. George[/quote] Please get back to me chris.....much appreciated.

Hi Chris, What sort of gains would you expect out of this. Also what will the pipe to suit be worth? Remember I already have you piping on the car. Thanks mate.....Ah and I got the hot side today thanks again. George

Hi Chris, just wanting to confirm that I have paid and awaiting one of these units. I didnt see my name on the list, thats all. Thanks

I am paid, and I can't wait.. thanks chris

Hi Chris, Please put me down for one. Raw pipe, blue joners. I will be using it with the cooler that I bought of senna. Thanks mate. I will call you for payment. George

Not really seeing that I have the option of returning it , as long as I have not used. Thanks anyway.

Anyone?

Hi boys, I got advice off a member on here about BOV's, which was much appreciated. He recomended a 38mm dual port. So I went into repco today to buy one, and they had the 32mm version on special for $160. Compared to the $500 they wanted for the 38mm, that was pretty cheap. I ended up buying the 32mm. I just wanted to konw if it will be suitable?? I am currently running 8psi, but that will be going up in the future...may be 12-15 psi. What to you guys think??? Thanks.

I downloaded this manual, both parts. It works but no turbo engine. Is there one around with the turbo????

Its all good. The calipers were labelled wrong left was right and right was left. All sorted, had me worried.

awesome wheels allright....any ideas on price tag, roughly..

I got a set of 6/4 pot brembos for my ba. Went to fit them and the caliper clashes with the stub axle arm. any ideas..... I am panicing a bit...please help.

Thank you very much for your help boys. Looks like I am ging to have some fun finding wheels.....Especially when I cant fit the brakes to the car until I have the wheels, cause they will not fit under the 17" that are on the car at the moment. thanks heaps anyway.

anyone?????

Hi guys, just after some advice, I have a set of premium brembo brakes (the six spot calipers and rotors) which I am fitting to my ba xr6t. I am currently shopping for a set of deep dished 20's. Unfortunatly non of the shops that I have been too can give me solid answer on the offset that I will need to run so they dont clash with the brembos. I am hoping someone here has worked it out and can tell me. p.s. is there a topic on here dedicated to pics of falcons with upgraded wheels? thank for all your help

hi boys, I know its ben a while, but I had a few issues to deal with unfortunatly whick kept me away from my T. I fitted the guages without any major problems, the speco sandwich plate worked really well (a bit fidelly to fit), I cut the vaccum line into the bov, and that worked fine also. one thing though, I mounted the guages in the centre of the dash using an ss pod, but the vaccum line is a very tight fit behind there, I am guessing its gonna crack very soon. have any of you rigged something up to solve this problem. thanks

just a quick one boys... I am installing a boost and oil pressure guage. I got the sandwich panel for the oil pressure so that should be sweet, but I am wondering where the best place to tap into the vacum line is? its a mechanical boost guage so just need to put the T piece in the line somewhere... thanks boys

ok now I am gonna sound real stupid....but who is the wog?