Leaderboard
Popular Content
Showing content with the highest reputation on 26/07/24 in all areas
-
Furken yay Friday1 point
-
I went to ebay and typed in Falcon caliper kit and this was one of many listings. Use a pair of multi grips to remove the piston. That bit on the sump is from when the sump was cast in the foundry. If you are adamant that it is leaking from there then you can either get it welded, chuck some JB weld or fuel tank putty etc over it.1 point
-
This is not how you check the level. It has to be dead cold and then you check it, you are probably 600mL to 1L low on fluid still. Do this before you pull the trans apart.1 point
This leaderboard is set to Sydney/GMT+11:00